FITTING
RIMFINITY IS FOR PROFESSIONAL FITTING ONLY
ONLY TO BE FITTED BY TRAINED TYRE FITTING TECHNICIANS WITH TYRE FITTING EQUIPMENT
Deflate the tyre and then use a bead roller to press the tyre away from the rim, then stretch the RIMFINITY band over wheel so the tail section fits to base of wheel barrel and ensure lip sits flush on top edge of wheel rim. Do not use tyre lube.
Make sure all gripping ribs are well inside the tyre seal, then inflate the tyre slowly ensuring the band is not pushed out too much. If there is any lift, deflate and use a bead roller and soft mallet to assist in seating the band prior to inflating again. As per picture above, if correctly fitted, they will sit above the rim edge and not cover the face of the wheel.
RIMFINITY bands are size specific and fit on 15”, 16”, 17” or 18” wheels. Do not try and fit the wrong size band.
RIMFINITY are designed as a styling trim that offers kerb protection to both the wheel & tyre wall.
RIMFINITY should be inspected regularly and replaced if damaged.
Please contact us if you require any help or advice on fitting.